Contact Us

 About Us

 Certificates

MADE IN RUSSIA

RLDA, 8 Berjevoy spoosk, Taganrog 347900, Russia, Ph.: (8634) 47-70-40, 47-70-44, mobile +7 928-132-1161, E-mail: info@RLDA.ru

 

Home


Products

   Distributed Control System
     NL-series

   Spark-safe NL-Ex series

   Interface Converters

   Measuring Sensors
     & Transducers

   PLC - Programmable Logic
     Controllers

  Software


Technical Support

  Papers

  Support

Site Search

 RUSSIAN>>

Industrial Programmable Logic Controllers (PLC)

NLon-CED is a full-featured medium power PLC (see table below) destined for industrial system with I/O channel number up to 8000 that is possible by the use of I/O modules NL and NL-Ex series. PLC has 5.7" TFT LCD display on board and allows to connect keyboard and mouse for programming. Can be programm with free software CoDeSys.

NLon-CE is full-featured medium power PLC (see table below) oriented for industrial system with I/O channel number up to 8000 that is posiible using I/O modules NL and NL-Ex series. Allows to connect external TFT LCD display, keyboard and mouse for programming. Can be programm with free software CoDeSys.


NLon-1AT is simple C-programmable PLC for local process automation using I/O modules NL and NL-Ex-series. Has spark-safe (intrinsically safe i) circuits modification.


Picture (Click to view better )

Features

Price, USD

NLcon-CED, pdf 1.2Mb

Programming Examples (zip 2.6 )

CoDeSys

CoDeSys RTS.zip

target.zip

    Panel mounted PLC
  • programmable logic controller (PLC) for panel mounting
  • programmed with free CoDeSys software or #, Visual Basic
  • supports NL and NL-Ex-series of module and any RS-485 and Modbus RTU/DCON compatible modules
  • maximum allowable channel number is 8000
  • compatible with IEC 61131
  • real-time OS Windows CE 5.0
  • one Ethernet 10/100 Base port with galvanic decoupling
  • two RS-485 ports with galvanic decoupling for each channel (Modbus RTU and DCON protocols)
  • one USB port for mouse, keyboard, flash-disk
  • Intel XScale PXA270 520 MHz processor
  • 64/128 Mb RAM
  • in-system flash memory 32/64 Mb
  • external flash-card SD 4 Gb
  • watchdog timer
  • nonvolatile real time clock and 2 external events couters (TTL logical levels)
  • "hot replacement" possibility
  • supply voltage from 10 to 30 V
  • temperature range from -25 to +70
  • dimensions 18413552.5 mm
  • weight 578 g.

1039 (CoDeSys-compatible)

909 (only C# or VB programmed)

 

 

NLcon-CE, pdf 1,2Mb

Programming Examples (zip 2.6 Mb)

CoDeSys

CoDeSys RTS.zip

target.zip

    DIN-rail mounted PLC
  • programmable logic controller (PLC) for DIN-rail mounting
  • support NL and NL-Ex-series of module and any RS-485 and Modbus RTU/DCON compatible modules
  • maximum allowable channel number is 8000
  • compatible with IEC 61131
  • programming with free software CoDeSys or #, Visual Basic
  • real-time OS Windows CE 5.0
  • one Ethernet 10/100 Base port with galvanic decoupling
  • two RS-485 ports with galvanic decoupling for each channel
  • Modbus RTU and DCON protocols
  • CAN or RS-232 port can be installed instead of one of RS-485 ports as option
  • one USB port for mouse, keyboard, flash-disk, printer
  • Intel XScale PXA270 520 MHz processor
  • 64/128 Mb RAM
  • in-system flash memory 32/64 Mb
  • external flash-card SD 2 Gb
  • watchdog timer
  • nonvolatile real time clock and 2 external events couters (TTL logical levels)
  • "hot replacement" possibility
  • supply voltage from 10 to 30 V
  • temperature range from -25 to +70
  • dimensions 1197633 mm
  • weight 130 g.

844 (CoDeSys-compatible)

714 (only C# or VB programmed)

 

NLcon-1AT, pdf 0,8Mb

 

    C-programmed controller
  • simpe controller for DIN-rail mounting
  • wwithout display or buttons;
  • -programmed;
  • programm is loaded using RS-232 port;
  • 128 Kb flash memory for programm;
  • SRAM 4 Kb memory for data storing;
  • 8 bit 16 MIPS ATMEGA128 RISC processor;
  • without real time clock;
  • RS-485 port based fieldbus for I/O module connection

91


NLcon-1AT-Ex

250   

NLcon-1AT-D-3

    C-programmed controller
  • 4-digit display and 3 buttons for parameter setting
  • simpe controller for DIN-rail mounting
  • wwithout display or buttons
  • -programmed
  • programm is loaded using RS-232 port
  • 128 Kb flash memory for programm
  • SRAM 4 Kb memory for data storing
  • 8 bit 16 MIPS ATMEGA128 RISC processor
  • real time clock
  • RS-485 port based fieldbus for I/O module connection

123

 

©RLDA, 2013              

© Microsoft, Windows, and the Windows CE are registered trademarks of Microsoft Corporation in the United States and/or other countries

RLDA, 8 Berjevoy spoosk, Taganrog 347900, Russia
Ph.:
(8634) 47-70-40, 47-70-44, mobile +7 928-132-1161, E-mail: info@RLDA.ru